GO-33 Violin Clip
1. Knob-type clip design; it can be used for instruments with different thicknesses (violas and violins)
2. There is padding on both the top and bottom of the clip knob to prevent impacts from vibrations,fitting the reception locations of the instruments.
3. The push-type design is adopted for the installation location of the microphone, allowing users to adjust the height of the microphone to choose the most suitable reception position .
-
• Change the Adapter, not the Mic
Four types adapter plugs compatible with renowned wireless equipment
1. GO-31C - 4Pin Mini XLR , Suitable for CAROL
2. GO-31A - 3Pin Mini XLR , Suitable for AKG SR4500 series
3. GO-31SE - ø3.5 TRS , Suitable for SENNHEISER EW-D & EW 300 G2 series
4. GO-31SH - 4Pin Mini XLR , Suitable for SHURE SLX series
• GO-33 Violin Clip
1. Knob-type clip design; it can be used for instruments with different thicknesses .
2. There is padding on both the top and bottom of the clip knob to prevent impacts
from vibrations,fitting the reception locations of the instruments.
3. The push-type design is adopted for the installation location of the microphone,
allowing users to adjust the height of the microphone to choose the most suitable
reception position .
• Change the Clip, not the Mic
Suitable for Various instruments
GO-31 Series instrument MicrophoneType Condenser Polar Pattern Cardioid Impedance 2.2KΩ ± 30% (at 1,000 Hz) Sensitivity -36 ± 3dBV/Pa (at 1,000 Hz) Frequency Response 50Hz~15,000Hz Power Supply DC 3V Cable Ø1.5mm x 1.5m Adapter Included 1pc ( GO-31C : 4Pin Mini XLR
GO-31A : 3Pin Mini XLR
GO-31SH : 4Pin Mini XLR
GO-31SE : ø3.5 TRS )Dimension Ø20.9 x 37.4 x 213.5mm Weight (without cable) 39g .png)
-
